- 1 How do you mic a choir for live performance?
- 2 How do you mic a gospel choir?
- 3 Are condenser mics good for choirs?
- 4 How loud is a choir?
- 5 How do you mic a stage?
- 6 What is an ambient mic?
- 7 What is the best way to mic a choir?
- 8 What is Ortf mic placement?
- 9 How do you record a large choir?
- 10 What is a cardioid condenser microphone?
- 11 What is a phantom power supply?
How do you mic a choir for live performance?
When placing mics to pick up the choir, a critical factor is gain before feedback. To get enough gain, you must to mic the choir much closer than you would for recording. Place the mics about 18 inches in front of the first row of singers, and about 18 inches above the head height of the back row (Figure 1).
How do you mic a gospel choir?
Stereo Mics The easiest way to mic a small choir (25 voices or fewer) is to use a single stereo mic or a pair of mics. I’ve used coincident (two capsules aligned side by side) stereo mics similar to the RODE NT4 small-diaphragm condenser or the Telefunken AR70 large-diaphragm condenser.
Are condenser mics good for choirs?
A great quality cardioid condenser microphone will usually serve the purpose for choirs, but there are other great alternatives available. In terms of sensitivity, condenser microphones are an ideal option.
How loud is a choir?
Taking 3 dB as a distinguishable level difference for most listeners, a choir voice range profile should show a range of at least 15 dB between the softest (pp) and loudest (ff) notes over a wide frequency range (about 2 octaves per choir section).
How do you mic a stage?
On The Floor
- Place/move loudspeakers close to the audience and as far from the mics as possible.
- Ride the mic faders on the mixer up and down, following the action on stage.
- Place the mics as close to the actors as possible (without getting in their way).
What is an ambient mic?
Ambient miking is simply placing the mic far enough away from the sound source so that you capture more of the room sound (the reverb and delay) than the sound of the actual instrument in your recording. You can even put the mic in an adjacent room, although admittedly this is an unorthodox technique.
What is the best way to mic a choir?
Seven simple rules:
- Place the choir microphones properly.
- Use the minimum number of microphones.
- Turn down unused mics.
- Let the choir naturally mix itself.
- Don’t over-amplify the choir.
- Try not to sing at the mic.
- Sing in a natural voice.
What is Ortf mic placement?
ORTF Mic Placement ORTF stands for Office de Radiodiffusion Télévision Française. As a near-coincident pair, the mic capsules are spaced 17 cm (~7 inches) apart and pointed outwards at a 110° angle. The capsules should be in the same horizontal plane but pointed more widely outward than a coincident pair.
How do you record a large choir?
10 Tips for Recording a Choir
- Find the Right Space.
- Arrange the Choir for Optimal Blend.
- Pick Your Favorite Stereo Mic Setup.
- Use Small-diaphragm Condensers for Overheads.
- Use the Three-Foot Rule for Mic Placement.
- Use Room Mics for Ambiance.
- Use Spot Mics When Necessary.
- Leave Plenty of Headroom.
What is a cardioid condenser microphone?
The most common microphone polar pattern, and the one used by every PreSonus condenser microphone is called “ cardioid.” The word “ cardioid ” is derived from the Greek word for “heart.” A cardioid polar pattern means the microphone primarily picks up sound within an area that is roughly heart-shaped when shown on a two-
What is a phantom power supply?
Phantom power, in the context of professional audio equipment, is DC electric power transmitted through microphone cables to operate microphones that contain active electronic circuitry. Phantom power supplies are often built into mixing consoles, microphone preamplifiers and similar equipment.